Standard Video Transcript

(soft piano music)

[Announcer] The InteliSwab COVID-19 Rapid Test is designed to be the most intuitive and easy-to-use self-test available. It's so simple and user-friendly, it can be used anywhere, and any time, providing easy-to-read results, in just 30 minutes. This video will take you step-by-step through the simple test process, but be sure to read the enclosed instructions fully before performing your test.

Okay. Inside the InteliSwab kit, you'll find two sealed foil pouches. Each foil pouch contains one test device and one tube. Inside your kit, you will also find the test stand for the tube, and full instructions for use in English and Spanish. Before you begin, be sure you have a way to time your test. Next, wash your hands thoroughly with soap and water for 20 seconds, and dry. Then place the test stand on a flat surface.

Now, pick up one of the two-part pouches. Tear open the pouch containing the tube, remove it, hold it upright, then gently take the cap off, by rocking it back and forth. Do not twist, and do not pour out the liquid. Slide the tube into the test stand and let it rest at an angle, as shown.

Lightly blow your nose with a tissue to make sample collection easier. Do not use the tissue to clear out your nasal passage. Then wash your hands thoroughly.

Remove the test device from the foil pouch, and be sure not to touch the flat swab tip with your fingers. Insert the tip of the flat swab inside your nostril. For adults, circle around the nostril 15 times, and maintain contact with the inside wall of the nostril. Do the same with your other nostril, circling the swab around 15 times.

If you are collecting from a child ages 2 to 14, circle the swab slowly, at least four times in each nostril. This should take about 15 seconds. You may get a false result if you do not swab the correct number of times.

Once finished, hold down the test stand firmly, and place the test device into the tube. Swirl the test device 10 times to mix the swab sample with the liquid in the tube. Make sure the swab is toward the back of the tube so that it makes contact with the liquid.

Now just leave the device in the tube with the results window facing you, and the stick fully down in the tube. Start your timer for 30 minutes, and do not touch the device or tube during this time. When you see a pink background pass through the results window, you'll know it's working.

After 30 minutes, read your results. And remember, reading results before 30 minutes, or after 40 minutes, may cause false results.

Now, let's take a look at how to interpret your results. Your test is negative if there is a reddish purple line next to the C, and no line next to the T. There must be a line next to the C to be able to interpret a negative result.

All negative results are presumptive, and require serial or repeat testing. To increase the chance that a negative result for COVID-19 is accurate, you should test again in 48 hours if you have symptoms on the first day of testing. Test two more times at least 48 hours apart if you do not have symptoms on the first day of testing.

You have a positive result if there is a reddish purple line next to the T, and no line next to the C, as seen here. You have a positive result if there is a line next to the T, and a line next to the C, even if the C line is faint, as seen here. You also have a positive result if there is a faint line next to the T, and a line next to the C, as seen here.

Your result is invalid if no lines are present, if the lines are not complete, or if a reddish-purple background makes it impossible to read the test after 30 minutes.

After your test, call your healthcare provider to report your result.

This chart shows you how to use this test for serial or repeat testing. If you have a negative result, test again in 48 hours, if you have symptoms on the first day of testing. Test two more times, at least 48 hours apart if you do not have symptoms on the first day of testing.

If you are unsure of your result, contact us at 1-833-601-0127. InteliSwab. Smart Science Made Simple.

(soft piano music)